What Are The Common Mistakes Of Workers On Flame Retardant Coverall?
If properly worn, flame retardant coverall can provide life-saving protection against a variety of workplace hazards, including arc flash, flash fire and molten metal splashes. However, if not properly worn, the flame resistant uniform clothes not only do not meet industry standards, but also have much worse results.To help clarify some of the mistakes people make when wearing FR uniform, here is a list of fr clothing that is worn incorrectly. This information will help you get the full security benefits of FR coveralls - even saving your life.
Five Ways To Improperly Wear Flame Retard Workwear Clothing:
1.Wearing a non-FR outer layer: Wearing a non-FR jacket and wearing a regular non-FR garment may be tempting in inclement weather. Even if you wear a fireproof suit, the non-FR outer layer will still ignite and burn, putting you at risk. In the face of cold weather, it is important to invest in the appropriate FR flame retard workwear coat.
2.Wearing a non-FR synthetic bottom layer: High performance T-shirts made of polyester or other synthetic materials are commonly used to help control moisture, but they are not flame retardant and can actually melt onto the skin. Ideally, the bottom layer is FR. This not only solves the melting problem, but also does not ignite and continue to burn if accidentally exposed to danger.
3. Roll up the sleeves: Rolling up the sleeves seems to be the perfect way to defeat the heat; however, this exposes the arm and should be avoided. This is especially important for arc flash exposure because the arm may be closest to the event and thus see the most heat. Instead, look for FR flame resistant uniform garments made from lightweight moisture wicking fabrics that provide a higher level of comfort without sacrificing safety.
4. Unpack the flame resistant uniform coveralls or untie the fr shirt: Just like rolling up the sleeves, unfastening or unfastening the FR garment may expose the skin or (as mentioned above) the non-FR lower layer may ignite and burn. Once again, look for FR garments made from lightweight, moisture wicking fabrics that provide a higher level of comfort without sacrificing safety.
5.Don't clip it on the shirt: If the tail of the shirt is not properly inserted, the heat and flame will move at the bottom of it and cause more damage. Invest in FR flame retard workwear clothing, which is specially constructed with long fr shirts to prevent this from happening.
Therefore, to ensure that your FR flame retard workwear clothing meets specifications and is ready to protect your safety, remember to put on the FR coat, avoid synthesizing the lower layer, then roll it up, pull the zipper and tuck it in.